2.5m Composite Slatted Wall Cladding Single Start Profile Trim
Begin your slatted wall cladding project with Cladco’s composite slatted start profile trim. Designed to secure your first panel in place, this single trim allows for a clean and consistent start to your cladding run. Available in six colours to match Cladco capped composite slatted panels, it pairs seamlessly with the double end profile trim, which is used to neatly finish the final panel at the end of the installation.
More About Our Slatted Single Start Profile Trims
Begin your slatted wall cladding installation with Cladco capped composite single start profile trims, specifically designed for use with our composite slatted cladding panels.
Each trim features a durable composite construction and a textured outer surface that replicates the natural grain of timber. With a hollow core design to match Cladco slatted cladding panels, these trims provide a cohesive and easy-to-connect starting point for your cladding installation.
Trim specifications
Length: 2.5m
Width (incl. lip): 49mm
Thickness: 26mm
Finish: Textured grain
Weight: 1.5kg approx.
Colours: Walnut, silver grey, charcoal, teak, coffee, and stone grey
Available in the same six colours as our composite slatted panel range, teak, walnut, stone grey, charcoal, coffee, and silver grey, these trims are designed to perfectly match your cladding installation for a high-end, stylish finish.
Easy to install using a tongue and groove method, Cladco single start profile trims enable you to begin a continuous panel run, which can then be neatly finished with a matching double end profile trim. For full installation guidance, please refer to our installation guide.
*Cladco Composite products are available as FSC® certified for the same cost. If you require FSC® certified products, please ask for these when placing your order.
Please note that the images and colours above are used for illustration purposes only. Actual items may vary slightly from the image displayed.
From £17.94 inc VAT
From £17.94 inc VAT
From £17.94 inc VAT
From £17.94 inc VAT
Order A Sample Pack!
Download our printable installation guide.
Download the datasheet for 2.5m Composite Slatted Wall Cladding Single Start Profile Trim
| Type | When? | Cost? | ||
|---|---|---|---|---|
 |
National Delivery | Orders under £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£192.00 |
| Orders over £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£96.00 | ||
| Orders over £1,500 | Est. 5 working days* Roofing items 7-10 working days* |
FREE | ||
| Scotland Delivery | Est. 15 working days* Roofing items 7-10 working days* |
£360.00 | ||
|
|
||||
|
Millboard Delivery | Orders under £2,000 | Est. 5 working days* | £192.00 |
| Orders over £2,000 | Est. 5 working days* | FREE | ||
|
|
||||
 |
Parcelforce Standard | (Small Parcels) | 3-5 working days* | £8.50 |
| Parcelforce Standard | (Large Parcels) | 3-5 working days* | £30.00 | |
|
|
||||
 |
Sample Packs via Courier | 5 working days* | FREE | |
*Please allow for public holidays and weekends (non-delivery days)
Some of our products are available for collection from our warehouses in Okehampton (Devon) and Andover (Hampshire) - This option will show at checkout, when available.
Standard collection lead time is 3-5 working days, this may vary depending on the product. If you would like to collect your order after 2 hours, please choose this option at checkout.
Please note that collections are only available from Monday-Friday, 08:00 - 17:00 & Saturday, 08:00 - 12:30 (Note: this IS the cut off time for collections, despite our closing time of 13:00)
Please Note The Following Prior To Collection:
Vehicles we can and cannot load
Cladco Profiles will only load flatbed lorries and flatbed trailers for insurance purposes. If the appropriate vehicle is not available, two people would be required for a collection.
Cladco Profiles will NOT load any vehicles with roof racks, horse boxes, cattle lorries or fixed-sided trailers. Cladco Profiles has the right to refuse loading a vehicle for any reason.
Before arranging a collection, please read our Customer Collection Notice below.
Our Okehampton HQ and Warehouses (Devon)
Our Andover Warehouses (Hampshire)
Customer Collection Notice
For those customers wishing to collect materials, we ask you report to the office first in order to be seen by a member of the sales team. Your goods will then be picked and brought to your vehicle.
Please note that during busy periods you may experience a wait while our yard staff serve other customers or are loading/unloading other vehicles.
We respectfully draw your attention to the following points:
- It is the ultimately the responsibility of the customer to load his/her vehicle and to ensure the goods are safely/ securely strapped down.
- Our staff will be happy to assist you load your goods onto appropriate vehicles by way of fork lift trucks. Our staff will not handball any goods into enclose vehicles. The loading of the vehicle is carried out entirely at the customers own risk. We will not be held liable for any damage that may occur to your vehicle or goods collected from our premises during the transport of said goods.
- It is the responsibility of the customer to ensure both their vehicle and the goods are safe when they leave our premises.
- We can advise the approximate weight of materials prior to you arriving so that you can be sure your vehicle is capable of carrying the intended load. Please ensure that you bring appropriate ropes, straps or other securing materials as we are unable to provide you with any upon arrival.
- We strongly recommend you bring suitable protection materials to prevent your ropes/straps etc. be damaged by these edges. We recommend that you use good quality protective gloves when handling materials.