Millboard® Envello Cladding Aluminium Perforated Closure Trim 3m
This Millboard® Envello aluminium perforated closure trim is specifically designed for use with Millboard® Envello cladding boards. Installed behind the boards, it protects the ventilated cavity by preventing insects and small rodents from gaining access. It also maintains essential airflow, helping preserve the performance and appearance of your cladding system. It should be used wherever there is an open entry point to a ventilated cavity.
Why Do You Need To Use Millboard® Envello Cladding Aluminium Perforated Closure Trims?
This 3m-long Millboard® Envello aluminium perforated closure trim is designed to prevent insects and rodents from entering the ventilated cavity behind the cladding boards, while still allowing essential airflow.
It can be installed in multiple areas throughout your cladding project, including at the base alongside the starter trim, independently at the top, and in conjunction with corner profiles, for effective protection and ventilation across the system.
This perforated closure trim is suited to 25mm or 50mm batten sizes and is used alongside Millboard® Envello Shadow Line+ and Envello Board & Batten+ cladding ranges.
Trim specifications
Length: 3m
Width: 25mm x 50mm
Weight: 500g
Material: Aluminium
For optimal placement, the perforated closure should be positioned between the back of your battens and the wall. This should be considered when fixing the battens. Alternatively, the perforated closure can be fixed to the front of the battens using the 20mm stainless steel fixings.
When using perforated closure trims with external or internal corner profiles, you will need to attach them to the back of your corner profiles using 20mm stainless steel screws at 200mm intervals. These are then secured to the battens at the corners. When installing a square corner trim, a similar process is followed.
For full installation instructions and a list of required tools, see the Shadow Line+ cladding horizontal installation guide (or the vertical installation guide), or refer to the Board & Batten+ cladding horizontal installation guide (or the vertical installation guide), depending on the range you’re working with.
Order A Sample Pack!
| Type | When? | Cost? | ||
|---|---|---|---|---|
 |
National Delivery | Orders under £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£192.00 |
| Orders over £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£96.00 | ||
| Orders over £1,500 | Est. 5 working days* Roofing items 7-10 working days* |
FREE | ||
| Scotland Delivery | Est. 15 working days* Roofing items 7-10 working days* |
£360.00 | ||
|
|
||||
|
Millboard Delivery | Orders under £2,000 | Est. 5 working days* | £192.00 |
| Orders over £2,000 | Est. 5 working days* | FREE | ||
|
|
||||
 |
Parcelforce Standard | (Small Parcels) | 3-5 working days* | £8.50 |
| Parcelforce Standard | (Large Parcels) | 3-5 working days* | £30.00 | |
|
|
||||
 |
Sample Packs via Courier | 5 working days* | FREE | |
*Please allow for public holidays and weekends (non-delivery days)
Some of our products are available for collection from our warehouses in Okehampton (Devon) and Andover (Hampshire) - This option will show at checkout, when available.
Standard collection lead time is 3-5 working days, this may vary depending on the product. If you would like to collect your order after 2 hours, please choose this option at checkout.
Please note that collections are only available from Monday-Friday, 08:00 - 17:00 & Saturday, 08:00 - 12:30 (Note: this IS the cut off time for collections, despite our closing time of 13:00)
Please Note The Following Prior To Collection:
Vehicles we can and cannot load
Cladco Profiles will only load flatbed lorries and flatbed trailers for insurance purposes. If the appropriate vehicle is not available, two people would be required for a collection.
Cladco Profiles will NOT load any vehicles with roof racks, horse boxes, cattle lorries or fixed-sided trailers. Cladco Profiles has the right to refuse loading a vehicle for any reason.
Before arranging a collection, please read our Customer Collection Notice below.
Our Okehampton HQ and Warehouses (Devon)
Our Andover Warehouses (Hampshire)
Customer Collection Notice
For those customers wishing to collect materials, we ask you report to the office first in order to be seen by a member of the sales team. Your goods will then be picked and brought to your vehicle.
Please note that during busy periods you may experience a wait while our yard staff serve other customers or are loading/unloading other vehicles.
We respectfully draw your attention to the following points:
- It is the ultimately the responsibility of the customer to load his/her vehicle and to ensure the goods are safely/ securely strapped down.
- Our staff will be happy to assist you load your goods onto appropriate vehicles by way of fork lift trucks. Our staff will not handball any goods into enclose vehicles. The loading of the vehicle is carried out entirely at the customers own risk. We will not be held liable for any damage that may occur to your vehicle or goods collected from our premises during the transport of said goods.
- It is the responsibility of the customer to ensure both their vehicle and the goods are safe when they leave our premises.
- We can advise the approximate weight of materials prior to you arriving so that you can be sure your vehicle is capable of carrying the intended load. Please ensure that you bring appropriate ropes, straps or other securing materials as we are unable to provide you with any upon arrival.
- We strongly recommend you bring suitable protection materials to prevent your ropes/straps etc. be damaged by these edges. We recommend that you use good quality protective gloves when handling materials.
