90º Corner Barge Flashings in Polyester Paint Finish - 3m 200mm x 200mm
Barges, sometimes known as Verges, are used at the end of a run of sheets to trim and seal off the edge of the roof. All flashings are a vital part of any profiled clad roof, they not only help to weatherproof the building but also add to it aesthetically too.
Barges are available in a range of finishes and colours to match or contrast our roofing sheets depending on the look you are after. They are secured by stitching them (Using ST22 Stitching Screws) to the roofing sheet below. You will need to allow an overlap of a minimum 100mm when fitting barges end on end.
About Our Barge Board Flashings
Manufactured as a 3m length and refolded to a 90-degree internal angle, the barge board flashings for corrugated roofs will flex 10 – 15 degrees either way, dependent on your needs. Cladco folded steel flashings come with a safety welt to increase the strength of the material. Used at the end of a run of sheets to trim and seal off the edge of the roof, at Cladco Profiles we aim to accommodate wherever possible. For custom flashings simply give us the dimensions or drawing of the trim you need to be folded and we will do our best to accommodate you.
Our flashings come with a safety welt to increase the strength of the material. Stock flashings for corrugated roofs have a 90-degree angle and measure 200mm x 200mm with a 3m length. Flashings are a necessary part of any profiled clad building and with the range and colours that are available can enhance the aesthetics of any structure.
These Flashings are only recommended for use with our 13/3 Corrugated, 32/1000 Box Profile and 34/1000 Box Profile Roofing Sheets.
Please note: The 200 x 200 flashings give a coverage of 192 x 192 due to the 8mm welt.
Please note: All Juniper Green polyester sheets and flashings may exhibit slight colour variances between products. If you are looking to match to a previous or existing order, please call us on 01837 659901.
Our Flashings coated in Polyester Paint are sent with a clear protective film. To prevent it from adhering to the coating, peel the film off after installation or when exposed to direct sunlight or rain while in storage.
From £19.14 inc VAT
Order A Sample Pack!
Download our printable installation guide.
Download the datasheet for 90º Corner Barge Flashings in Polyester Paint Finish - 3m 200mm x 200mm
| Type | When? | Cost? | ||
|---|---|---|---|---|
 |
National Delivery | Orders under £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£192.00 |
| Orders over £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£96.00 | ||
| Orders over £1,500 | Est. 5 working days* Roofing items 7-10 working days* |
FREE | ||
| Scotland Delivery | Est. 15 working days* Roofing items 7-10 working days* |
£360.00 | ||
|
|
||||
|
Millboard Delivery | Orders under £2,000 | Est. 5 working days* | £192.00 |
| Orders over £2,000 | Est. 5 working days* | FREE | ||
|
|
||||
 |
Parcelforce Standard | (Small Parcels) | 3-5 working days* | £8.50 |
| Parcelforce Standard | (Large Parcels) | 3-5 working days* | £30.00 | |
|
|
||||
 |
Sample Packs via Courier | 5 working days* | FREE | |
*Please allow for public holidays and weekends (non-delivery days)
Some of our products are available for collection from our warehouses in Okehampton (Devon) and Andover (Hampshire) - This option will show at checkout, when available.
Standard collection lead time is 3-5 working days, this may vary depending on the product. If you would like to collect your order after 2 hours, please choose this option at checkout.
Please note that collections are only available from Monday-Friday, 08:00 - 17:00 & Saturday, 08:00 - 12:30 (Note: this IS the cut off time for collections, despite our closing time of 13:00)
Please Note The Following Prior To Collection:
Vehicles we can and cannot load
Cladco Profiles will only load flatbed lorries and flatbed trailers for insurance purposes. If the appropriate vehicle is not available, two people would be required for a collection.
Cladco Profiles will NOT load any vehicles with roof racks, horse boxes, cattle lorries or fixed-sided trailers. Cladco Profiles has the right to refuse loading a vehicle for any reason.
Before arranging a collection, please read our Customer Collection Notice below.
Our Okehampton HQ and Warehouses (Devon)
Our Andover Warehouses (Hampshire)
Customer Collection Notice
For those customers wishing to collect materials, we ask you report to the office first in order to be seen by a member of the sales team. Your goods will then be picked and brought to your vehicle.
Please note that during busy periods you may experience a wait while our yard staff serve other customers or are loading/unloading other vehicles.
We respectfully draw your attention to the following points:
- It is the ultimately the responsibility of the customer to load his/her vehicle and to ensure the goods are safely/ securely strapped down.
- Our staff will be happy to assist you load your goods onto appropriate vehicles by way of fork lift trucks. Our staff will not handball any goods into enclose vehicles. The loading of the vehicle is carried out entirely at the customers own risk. We will not be held liable for any damage that may occur to your vehicle or goods collected from our premises during the transport of said goods.
- It is the responsibility of the customer to ensure both their vehicle and the goods are safe when they leave our premises.
- We can advise the approximate weight of materials prior to you arriving so that you can be sure your vehicle is capable of carrying the intended load. Please ensure that you bring appropriate ropes, straps or other securing materials as we are unable to provide you with any upon arrival.
- We strongly recommend you bring suitable protection materials to prevent your ropes/straps etc. be damaged by these edges. We recommend that you use good quality protective gloves when handling materials.
