Ridge Flashing in GreenCoat® Pural - 150 X 150mm
Used at the apex of your roofing to join the two sides together, Cladco ridge cover flashings are folded to a 130-degree angle and will flex 10 – 15 degrees either way, depending on your roof’s angle. Ridge cover flashings are an important component in any profiled clad apex roof and these GreenCoat® Pural ridge cover flashings are available in slate grey, nordic night black, and copper brown colours to match your roofing sheets.
Ridge Cover Flashings to Enhance Your Roofing
Our ridge flashings include a safety welt on the edge to increase the strength of the material and are available as a 3m length as standard. When fitting, please note you will need to allow a minimum of 200mm overlap from one ridge piece to the next. Sitting on top of the roofing sheets, the ridge flashing pieces need to be stitched to the roofing sheet below using stitching screws to ensure they are secured.
Contact us if you have any requirements for ridge flashings, we can fold most flashing shapes to a customer’s measurements to fit your roofing project.
It is advised that these Flashings are only installed alongside our 41/1000 Tile Form Roofing Sheets.
Please note: The 150 x 150 flashings give a coverage of 142 x 142 due to the 8mm welt.
Please note: The Mica coating is no longer available. This finish has now been upgraded to the new GreenCoat® Pural BT coated steel in 0.7mm thickness.
From £29.40 inc VAT
From £29.40 inc VAT
From £22.50 inc VAT
Order A Sample Pack!
Working out the total square meterage of your roof will require measuring the total width of the roof’s area as well as the distance from the eaves (the lowest point) to the apex (the highest point) of the roof. This should be undertaken carefully and safely.
We recommend taking these measurements from the inside of your building for safety purposes. Multiply the two measurements together to give the total square meterage of the roof.
For apex, or dual-sided, roofs, you will need to work out the square meterage of each side of the roof and add the numbers together for the total coverage.
Download our printable installation guide.
Download the datasheet for Ridge Flashing in GreenCoat® Pural - 150 X 150mm
| Type | When? | Cost? | ||
|---|---|---|---|---|
 |
National Delivery | Orders under £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£192.00 |
| Orders over £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£96.00 | ||
| Orders over £1,500 | Est. 5 working days* Roofing items 7-10 working days* |
FREE | ||
| Scotland Delivery | Est. 15 working days* Roofing items 7-10 working days* |
£360.00 | ||
|
|
||||
|
Millboard Delivery | Orders under £2,000 | Est. 5 working days* | £192.00 |
| Orders over £2,000 | Est. 5 working days* | FREE | ||
|
|
||||
 |
Parcelforce Standard | (Small Parcels) | 3-5 working days* | £8.50 |
| Parcelforce Standard | (Large Parcels) | 3-5 working days* | £30.00 | |
|
|
||||
 |
Sample Packs via Courier | 5 working days* | FREE | |
*Please allow for public holidays and weekends (non-delivery days)
Some of our products are available for collection from our warehouses in Okehampton (Devon) and Andover (Hampshire) - This option will show at checkout, when available.
Standard collection lead time is 3-5 working days, this may vary depending on the product. If you would like to collect your order after 2 hours, please choose this option at checkout.
Please note that collections are only available from Monday-Friday, 08:00 - 17:00 & Saturday, 08:00 - 12:30 (Note: this IS the cut off time for collections, despite our closing time of 13:00)
Please Note The Following Prior To Collection:
Vehicles we can and cannot load
Cladco Profiles will only load flatbed lorries and flatbed trailers for insurance purposes. If the appropriate vehicle is not available, two people would be required for a collection.
Cladco Profiles will NOT load any vehicles with roof racks, horse boxes, cattle lorries or fixed-sided trailers. Cladco Profiles has the right to refuse loading a vehicle for any reason.
Before arranging a collection, please read our Customer Collection Notice below.
Our Okehampton HQ and Warehouses (Devon)
Our Andover Warehouses (Hampshire)
Customer Collection Notice
For those customers wishing to collect materials, we ask you report to the office first in order to be seen by a member of the sales team. Your goods will then be picked and brought to your vehicle.
Please note that during busy periods you may experience a wait while our yard staff serve other customers or are loading/unloading other vehicles.
We respectfully draw your attention to the following points:
- It is the ultimately the responsibility of the customer to load his/her vehicle and to ensure the goods are safely/ securely strapped down.
- Our staff will be happy to assist you load your goods onto appropriate vehicles by way of fork lift trucks. Our staff will not handball any goods into enclose vehicles. The loading of the vehicle is carried out entirely at the customers own risk. We will not be held liable for any damage that may occur to your vehicle or goods collected from our premises during the transport of said goods.
- It is the responsibility of the customer to ensure both their vehicle and the goods are safe when they leave our premises.
- We can advise the approximate weight of materials prior to you arriving so that you can be sure your vehicle is capable of carrying the intended load. Please ensure that you bring appropriate ropes, straps or other securing materials as we are unable to provide you with any upon arrival.
- We strongly recommend you bring suitable protection materials to prevent your ropes/straps etc. be damaged by these edges. We recommend that you use good quality protective gloves when handling materials.