More About Cladco Metal Cleats
Our metal pre-punched cleats are designed specifically with our existing Z and C purlins in mind. These corresponding purlin cleats ease the installation process of purlins onto the structural frame, ideal for either cladding and roofing projects.
This metal bracket is secured to a supporting fixture, such as an RSJ, allowing for your purlins to be easily attached to the structural joists. Cleats can be mounted either on the top of the joist or positioned perpendicularly within it, enabling the purlin to sit flush with the edge. This configuration can be chosen based on your specific purlin support requirements.
Cleat specifications
Length: 135mm, 173mm, 195mm
Width: 129mm
Depth: 69mm
Punched hole size: 18.25mm
Material: S450 pre-galvanised steel
(Allow for 1mm tolerance)
The cleats are manufactured from high-strength galvanised steel to ensure that potential rusting and corrosion is minimal and that the purlin system remains sturdy and properly secured.
As well as being tailor-made for our range of metal purlins, the pre-punched cleats fit seamlessly with our bolt set. This will allow you to complete your purlin roofing or cladding installation with ease. These fixings are also sold as a set, or separately if needed.
It is advised to store the cleats in a dry and covered area to minimise contact with moisture and reduce the risk of rust. Keep off the ground using pallets and cover with tarpaulins where possible to avoid any unnecessary wear and tear or water damage prior to installation.
We recommend using two cleats for every purlin used, for a highly secure finish.
Make sure to handle the cleats with care to avoid damage or injury. Use safety gloves for protection from the sharp edges of the steel cleats.
Looking for purlin sleeves?
See our Z purlin sleeve connector
Looking for Z purlins?
See our metal Z purlins (priced by metre)
Or browse our purlin department for more…
Order A Sample Pack!
Download the datasheet for C & Z Purlin Cleat Bracket
| Type | When? | Cost? | ||
|---|---|---|---|---|
 |
National Delivery | Orders under £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£192.00 |
| Orders over £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£96.00 | ||
| Orders over £1,500 | Est. 5 working days* Roofing items 7-10 working days* |
FREE | ||
| Scotland Delivery | Est. 15 working days* Roofing items 7-10 working days* |
£360.00 | ||
|
|
||||
|
Millboard Delivery | Orders under £2,000 | Est. 5 working days* | £192.00 |
| Orders over £2,000 | Est. 5 working days* | FREE | ||
|
|
||||
 |
Parcelforce Standard | (Small Parcels) | 3-5 working days* | £8.50 |
| Parcelforce Standard | (Large Parcels) | 3-5 working days* | £30.00 | |
|
|
||||
 |
Sample Packs via Courier | 5 working days* | FREE | |
*Please allow for public holidays and weekends (non-delivery days)
Some of our products are available for collection from our warehouses in Okehampton (Devon) and Andover (Hampshire) - This option will show at checkout, when available.
Standard collection lead time is 3-5 working days, this may vary depending on the product. If you would like to collect your order after 2 hours, please choose this option at checkout.
Please note that collections are only available from Monday-Friday, 08:00 - 17:00 & Saturday, 08:00 - 12:30 (Note: this IS the cut off time for collections, despite our closing time of 13:00)
Please Note The Following Prior To Collection:
Vehicles we can and cannot load
Cladco Profiles will only load flatbed lorries and flatbed trailers for insurance purposes. If the appropriate vehicle is not available, two people would be required for a collection.
Cladco Profiles will NOT load any vehicles with roof racks, horse boxes, cattle lorries or fixed-sided trailers. Cladco Profiles has the right to refuse loading a vehicle for any reason.
Before arranging a collection, please read our Customer Collection Notice below.
Our Okehampton HQ and Warehouses (Devon)
Our Andover Warehouses (Hampshire)
Customer Collection Notice
For those customers wishing to collect materials, we ask you report to the office first in order to be seen by a member of the sales team. Your goods will then be picked and brought to your vehicle.
Please note that during busy periods you may experience a wait while our yard staff serve other customers or are loading/unloading other vehicles.
We respectfully draw your attention to the following points:
- It is the ultimately the responsibility of the customer to load his/her vehicle and to ensure the goods are safely/ securely strapped down.
- Our staff will be happy to assist you load your goods onto appropriate vehicles by way of fork lift trucks. Our staff will not handball any goods into enclose vehicles. The loading of the vehicle is carried out entirely at the customers own risk. We will not be held liable for any damage that may occur to your vehicle or goods collected from our premises during the transport of said goods.
- It is the responsibility of the customer to ensure both their vehicle and the goods are safe when they leave our premises.
- We can advise the approximate weight of materials prior to you arriving so that you can be sure your vehicle is capable of carrying the intended load. Please ensure that you bring appropriate ropes, straps or other securing materials as we are unable to provide you with any upon arrival.
- We strongly recommend you bring suitable protection materials to prevent your ropes/straps etc. be damaged by these edges. We recommend that you use good quality protective gloves when handling materials.
