250ml Pural BT Touch Up Paint
Pural BT touch-up paint (250ml) is ideal for small, localised repairs to GreenCoat® Pural BT-coated sheets, concealing scratches and exposed edges. Available in four colour-matched finishes - tile red, night black, slate grey, and silver fir green - it’s an easy and effective way to maintain a professional finish.
Pural BT Touch-Up Paint – 250ml
For GreenCoat® Pural BT Roofing & Cladding Sheets
Restore a consistent, professional finish to your pre-painted metal sheets with Cladco’s Pural BT Touch-Up Paint. This Pural BT touch-up paint offers a simple, effective way to conceal minor scratches, scuffs, and exposed edges, this high-quality paint is fully compatible with Cladco’s Pural BT standing seam, tile form, and flat sheets.
Perfect for small, localised repairs, it’s supplied in a 250ml tin with a wide opening, making application straightforward and mess-free with most standard brush sizes
Product Features:
Compatible with GreenCoat® Pural BT-coated steel
Available in 4 colours: Slate Grey, Night Black, Tile Red, Silver Fir Green
Supplied in 250ml tins – easy to apply with a brush
Non-hazardous and safe to store and handle
Made in the EU
To maintain paint quality, reseal the tin tightly after use and store in a cool, dry location away from direct sunlight and extreme temperatures.
Application Instructions
Touch-Up Paint for Pre-Painted Metal Sheets – Scratch & Surface Repair
Follow these best practices for effective and long-lasting repairs:
General Guidelines:
Apply only where needed – touch-up paint may age/fade differently to factory finishes
Apply two coats, with a total dry film thickness of 60 μm (i.e. 2 coats of 80 μm wet film)
Paint in conditions above +8°C and below 75% humidity
Ensure all surfaces are clean, dry, and free of grease or loose paint before application
For Scratches Up to 50mm Wide:
Remove any loose or flaking paint
Clean the area thoroughly
Use a soft brush or paint pen to apply paint directly to the scratch
Choose a brush that matches the width of the damage for minimal overlap
For Areas Over 50mm Wide:
Remove loose paint and clean the area
Prime using a rust inhibiting primer with a soft brush.
Once dry, apply Pural BT touch-up Paint as a topcoat with minimal overlap
Note: Always ensure a good colour match before application. Not suitable for large surface areas or full recoating.
From £20.70 inc VAT
From £20.70 inc VAT
From £19.14 inc VAT
Order A Sample Pack!
Working out the total square meterage of your roof will require measuring the total width of the roof’s area as well as the distance from the eaves (the lowest point) to the apex (the highest point) of the roof. This should be undertaken carefully and safely.
We recommend taking these measurements from the inside of your building for safety purposes. Multiply the two measurements together to give the total square meterage of the roof.
For apex, or dual-sided, roofs, you will need to work out the square meterage of each side of the roof and add the numbers together for the total coverage.
Download the datasheet for 250ml Pural BT Touch Up Paint
| Type | When? | Cost? | ||
|---|---|---|---|---|
 |
National Delivery | Orders under £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£192.00 |
| Orders over £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£96.00 | ||
| Orders over £1,500 | Est. 5 working days* Roofing items 7-10 working days* |
FREE | ||
| Scotland Delivery | Est. 15 working days* Roofing items 7-10 working days* |
£360.00 | ||
|
|
||||
|
Millboard Delivery | Orders under £2,000 | Est. 5 working days* | £192.00 |
| Orders over £2,000 | Est. 5 working days* | FREE | ||
|
|
||||
 |
Parcelforce Standard | (Small Parcels) | 3-5 working days* | £8.50 |
| Parcelforce Standard | (Large Parcels) | 3-5 working days* | £30.00 | |
|
|
||||
 |
Sample Packs via Courier | 5 working days* | FREE | |
*Please allow for public holidays and weekends (non-delivery days)
Some of our products are available for collection from our warehouses in Okehampton (Devon) and Andover (Hampshire) - This option will show at checkout, when available.
Standard collection lead time is 3-5 working days, this may vary depending on the product. If you would like to collect your order after 2 hours, please choose this option at checkout.
Please note that collections are only available from Monday-Friday, 08:00 - 17:00 & Saturday, 08:00 - 12:30 (Note: this IS the cut off time for collections, despite our closing time of 13:00)
Please Note The Following Prior To Collection:
Vehicles we can and cannot load
Cladco Profiles will only load flatbed lorries and flatbed trailers for insurance purposes. If the appropriate vehicle is not available, two people would be required for a collection.
Cladco Profiles will NOT load any vehicles with roof racks, horse boxes, cattle lorries or fixed-sided trailers. Cladco Profiles has the right to refuse loading a vehicle for any reason.
Before arranging a collection, please read our Customer Collection Notice below.
Our Okehampton HQ and Warehouses (Devon)
Our Andover Warehouses (Hampshire)
Customer Collection Notice
For those customers wishing to collect materials, we ask you report to the office first in order to be seen by a member of the sales team. Your goods will then be picked and brought to your vehicle.
Please note that during busy periods you may experience a wait while our yard staff serve other customers or are loading/unloading other vehicles.
We respectfully draw your attention to the following points:
- It is the ultimately the responsibility of the customer to load his/her vehicle and to ensure the goods are safely/ securely strapped down.
- Our staff will be happy to assist you load your goods onto appropriate vehicles by way of fork lift trucks. Our staff will not handball any goods into enclose vehicles. The loading of the vehicle is carried out entirely at the customers own risk. We will not be held liable for any damage that may occur to your vehicle or goods collected from our premises during the transport of said goods.
- It is the responsibility of the customer to ensure both their vehicle and the goods are safe when they leave our premises.
- We can advise the approximate weight of materials prior to you arriving so that you can be sure your vehicle is capable of carrying the intended load. Please ensure that you bring appropriate ropes, straps or other securing materials as we are unable to provide you with any upon arrival.
- We strongly recommend you bring suitable protection materials to prevent your ropes/straps etc. be damaged by these edges. We recommend that you use good quality protective gloves when handling materials.
