arrow-up

250ml Pural BT Touch Up Paint

£38.40
(3)

Pural BT touch-up paint (250ml) is ideal for small, localised repairs to GreenCoat® Pural BT-coated sheets, concealing scratches and exposed edges. Available in four colour-matched finishes - tile red, night black, slate grey, and silver fir green - it’s an easy and effective way to maintain a professional finish.

delivery NATIONAL DELIVERY - checking... from £4.99
Total Price: £38.40 inc VAT
loader
Loading...
Details

Pural BT Touch-Up Paint – 250ml

For GreenCoat® Pural BT Roofing & Cladding Sheets

Restore a consistent, professional finish to your pre-painted metal sheets with Cladco’s Pural BT Touch-Up Paint. This Pural BT touch-up paint offers a simple, effective way to conceal minor scratches, scuffs, and exposed edges, this high-quality paint is fully compatible with Cladco’s  Pural BT standing seam, tile form, and flat sheets.

Perfect for small, localised repairs, it’s supplied in a 250ml tin with a wide opening, making application straightforward and mess-free with most standard brush sizes

Product Features:

Compatible with GreenCoat® Pural BT-coated steel
Available in 4 colours: Slate Grey, Night Black, Tile Red, Silver Fir Green
Supplied in 250ml tins – easy to apply with a brush
Non-hazardous and safe to store and handle
Made in the EU

To maintain paint quality, reseal the tin tightly after use and store in a cool, dry location away from direct sunlight and extreme temperatures.

Application Instructions

Touch-Up Paint for Pre-Painted Metal Sheets – Scratch & Surface Repair

Follow these best practices for effective and long-lasting repairs:

General Guidelines:

Apply only where needed – touch-up paint may age/fade differently to factory finishes
Apply two coats, with a total dry film thickness of 60 μm (i.e. 2 coats of 80 μm wet film)
Paint in conditions above +8°C and below 75% humidity
Ensure all surfaces are clean, dry, and free of grease or loose paint before application

For Scratches Up to 50mm Wide:

Remove any loose or flaking paint
Clean the area thoroughly
Use a soft brush or paint pen to apply paint directly to the scratch
Choose a brush that matches the width of the damage for minimal overlap

For Areas Over 50mm Wide:

Remove loose paint and clean the area
Prime using a rust inhibiting primer with a soft brush.
Once dry, apply Pural BT touch-up Paint as a topcoat with minimal overlap

Note: Always ensure a good colour match before application. Not suitable for large surface areas or full recoating.

Read more Read less
Customers Also Viewed Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
0.7 GreenCoat® Steel Standing Seam Roof Sheet with Ribs
Available in 4 colours

From £20.70 inc VAT

0.7 GreenCoat® Steel Standing Seam Roof Sheet Without Ribs
Available in 4 colours

From £20.70 inc VAT

22mm Stitcher Screws With a 16mm Bonded Washer (Pack of 100)

£12.00 inc VAT

32mm Screws to Wood with Moulded Head (Pack of 100)
Available in 12 colours

From £19.14 inc VAT

Safety Gloves - Cut Level 5 Protective Gloves - Conforms to EN388 (4543)

From £7.14 inc VAT

Samples plus minus

Order A Sample Pack!

The best way to choose your preferred colour is with our Sample Packs. Order Sample Packs
How To Calculate Square Metres plus minus

Working out the total square meterage of your roof will require measuring the total width of the roof’s area as well as the distance from the eaves (the lowest point) to the apex (the highest point) of the roof. This should be undertaken carefully and safely.

We recommend taking these measurements from the inside of your building for safety purposes. Multiply the two measurements together to give the total square meterage of the roof.

For apex, or dual-sided, roofs, you will need to work out the square meterage of each side of the roof and add the numbers together for the total coverage.

Specifications plus minus
Weight
0.30kg
Technical Information plus minus

pdf Download the datasheet for 250ml Pural BT Touch Up Paint

Delivery plus minus
Type When? Cost?
National Delivery Orders under £1,000 Est. 5 working days*
Roofing items 7-10 working days*
£192.00
Orders over £1,000 Est. 5 working days*
Roofing items 7-10 working days*
£96.00
Orders over £1,500 Est. 5 working days*
Roofing items 7-10 working days*
FREE
Scotland Delivery Est. 15 working days*
Roofing items 7-10 working days*
£360.00

Millboard Delivery Orders under £2,000 Est. 5 working days* £192.00
Orders over £2,000 Est. 5 working days* FREE

Parcelforce Standard (Small Parcels) 3-5 working days* £8.50
Parcelforce Standard (Large Parcels) 3-5 working days* £30.00

Sample Packs via Courier 5 working days* FREE

*Please allow for public holidays and weekends (non-delivery days) 

Collection plus minus

Some of our products are available for collection from our warehouses in Okehampton (Devon) and Andover (Hampshire) - This option will show at checkout, when available.

Standard collection lead time is 3-5 working days, this may vary depending on the product. If you would like to collect your order after 2 hours, please choose this option at checkout.

Please note that collections are only available from Monday-Friday, 08:00 - 17:00 & Saturday, 08:00 - 12:30 (Note: this IS the cut off time for collections, despite our closing time of 13:00)

Please Note The Following Prior To Collection:

No Cutting On Site

PPE/Hi-Vis Must be Worn At All Times

AlL Visitors Must Report to Reception


Vehicles we can and cannot load

Cladco Profiles will only load flatbed lorries and flatbed trailers for insurance purposes. If the appropriate vehicle is not available, two people would be required for a collection.

Cladco Profiles will NOT load any vehicles with roof racks, horse boxes, cattle lorries or fixed-sided trailers. Cladco Profiles has the right to refuse loading a vehicle for any reason.

Before arranging a collection, please read our Customer Collection Notice below.

Okehampton

Our Okehampton HQ and Warehouses (Devon)

Hampshire

Our Andover Warehouses (Hampshire)

Read more

Customer Collection Notice

For those customers wishing to collect materials, we ask you report to the office first in order to be seen by a member of the sales team. Your goods will then be picked and brought to your vehicle.

Please note that during busy periods you may experience a wait while our yard staff serve other customers or are loading/unloading other vehicles.

We respectfully draw your attention to the following points:

  • It is the ultimately the responsibility of the customer to load his/her vehicle and to ensure the goods are safely/ securely strapped down.
  • Our staff will be happy to assist you load your goods onto appropriate vehicles by way of fork lift trucks. Our staff will not handball any goods into enclose vehicles. The loading of the vehicle is carried out entirely at the customers own risk. We will not be held liable for any damage that may occur to your vehicle or goods collected from our premises during the transport of said goods.
  • It is the responsibility of the customer to ensure both their vehicle and the goods are safe when they leave our premises.
  • We can advise the approximate weight of materials prior to you arriving so that you can be sure your vehicle is capable of carrying the intended load. Please ensure that you bring appropriate ropes, straps or other securing materials as we are unable to provide you with any upon arrival.
  • We strongly recommend you bring suitable protection materials to prevent your ropes/straps etc. be damaged by these edges. We recommend that you use good quality protective gloves when handling materials.
Read less
Frequently Asked Questions
It is designed to conceal minor scratches, scuffs, and exposed edges on Pural-coated sheets. It’s perfect for small, localised repairs caused during installation or from handling, helping to maintain the sheet’s appearance and protect vulnerable areas
No, this touch-up paint is intended specifically for small, localised repairs only. It is not suitable for large-scale surface painting or complete recoating of sheets.
This touch-up paint is available in four colour-matched finishes: slate grey, night black, tile red, and silver fir green. These shades are carefully matched to complement Cladco’s Pural-coated sheets.
It is compatible with Cladco’s GreenCoat® Pural BT-coated standing seam, tile form, and flat sheets, ensuring seamless blending with these product types.
Yes, the paint is non-hazardous and safe to store and handle, making it suitable for use in both domestic and commercial environments.

Did you find what you were looking for?

Reviews
Customer Reviews
5 Based on 3 reviews
HANDY LITTLE TIN!

Price

Quality

Value

HANDY LITTLE TIN – WENT ON WELL, NO MESS, AND COLOUR MATCH WAS PERFECT. WOULD BUY AGAIN IF NEEDED
Was this review helpful?
Great

Price

Quality

Value

Wasn’t expecting much but honestly this stuff saved me having to replace a panel. Went on easy, colour match was bang on (slate grey). Would definitely buy again
Was this review helpful?
SORTED IT IN ONE COAT

Price

Quality

Value

Did exactly what I needed. Used it to cover a few scratches from cutting. Really tidy result and no mess
Was this review helpful?
Prev
Next
You're reviewing: 250ml Pural BT Touch Up Paint
Your Rating *
Images

check-circle You submitted your review for moderation.

loader
Loading...
loader
Loading...